The <<Wagner-System>>® WS-L is a pure vertical system and is used for all types of claddings with different profile components.

The WS-L and WS-L light system consists mainly of form aluminium.
The thickness amounts to 4mm for the WS-L and 3mm for the WS-L light. WS-L light is normally used for light facade claddings. Material savings by using WS-L light can lower the costs for the support structure.

Technical features of the WS-L:
Slide and fix points are L-shaped aluminium wall fastener. They are not of the same shape.
Thus the fix point can be dimensioned depending on the dead load. They are independent of the slide points.

At the fix point dead loads of claddings and wind loads are transferred to the fastener point.

For taking the dead and wind loads, holes d=5,1mm are constructed with the minimum distance required of DIN (see figure).

At the slide points only, wind loads are transferred to the fastener surface.

For the absorbing of wind loads, slotted holes d=5,1x15mm with the minimum distance required by DIN have to be used (see figure).