The following listed profiles are used mainly for the carrying of window reveals and lintels. Individual applications are certainly possible, particularly by the construction of different connection to the facade.

Application window shut-off profile AlMgSi 0,5 F22/ F25
By using the following examples, tolerances of up to 20mm to the front edge of the facing can be absorbed, so a clean connection is guaranteed. Depending on the type of profile, the plate and cladding with sheet thickness from 1,5 to 8,0mm can be fed into to the profile.

In example 3 the profile has multifunctional utilization as a connection profile. Tile materials with sheet thickness from 1,0mm to 5,0mm can be used.

Chimney
Chimneys are often a problem during cladding reconstruction.
It is not permissible to tie the support structure to the chimney with fasteners.

Thus the wall fasteners are spanned to the chimney with threaded rods so that festening at the chimney is not necessary anymore.

U wall fastener
This wall fastener is used for adverse structural conditions.
This can occur at floor-to-floor heights or heavy weights of claddings.

Better structural values can be achieved by centric load initiation and high stiffness compared to angle wall columns.